Summer Starts Here - Save up to 70%
Thule AeroBlade Crossroad Roof Rack Installation - 2011 Mitsubishi Endeavor- Video
Today on this 2011 Mitsubishi Endeavor, we are going to be test fitting a Thule roof rack system using a 53 inch AeroBlade bars and the Rapid Crossroad feet. We already have our roof rack assembly put together and now we are ready to mount it up on the vehicle. Since this vehicle already has factory raised side rails, we do not have to worry about any measurement for positioning our roof rack. We do need to note that Thule recommends a maximum crossbar spread of 45 inches. So we want to make sure that we do not exceed this amount. We will go ahead and place our assembly up on top of the roof rack at the front of the vehicle. When we position the front bar, we need to make sure that it is overhanging evenly from left to right. more
12/20/2011 4:23:58 AM
Thule Crossroad Roof Rack Installation - 2011 Mitsubishi Endeavor- Video
Today on this 2011Mitsubishi Endeavor we will be test fitting the Thule roof rack system using the 58 inch crossbar and the crossroads feet. Today the crossbars are preassembled so we will now show you how they are installed on the vehicle. To begin we are going to mount the front crossbar. Three things that we need to make sure of when mounting the crossbar is that the crossbar is overhanging evenly from left to right. The triangle on the foot is centered on the side rail and the bar is perpendicular to the side rails. After the crossbar is in position, I will move back and forth to tighten down the feet, ensuring that the position does not move. Once the front bar is secure, we can move to the rear. more
12/20/2011 4:23:58 AM
Filter Videos
Filter Videos
